maven
New Member
Posts: 33
|
Post by maven on Apr 28, 2023 17:24:26 GMT -8
[quote author=" Baikal" source="/post/183687/thread" timestamp=" It's a red herring, a distraction actual problems. [/div][/quote] Says the guy who went on a tangent about Madoff and Fried earlier in the thread. The UP unit on page 3 shows it the best. The gasket recess is cut deeper on the engineer’s windshield, which, once draft angle is added into the mix, would make the edge of the window opening physically larger by several thousandths. And also explains why the opening infringes into the nose fillet on that side. Four photos from four angles of four different paint schemes and four different lighting sources should not show the same error if it was just parallax/camera trickery/optical illusion/black magic/ whatever else you want to call it. |
|
|
|
Post by edwardsutorik on Apr 28, 2023 17:28:47 GMT -8
That ain't what I see. I see bad lighting and bad angles.
Ed
|
|
|
|
Post by cemr5396 on Apr 28, 2023 17:31:46 GMT -8
That ain't what I see. I see bad lighting and bad angles. Ed on all of them, including the one taken outdoors in the sun?
and all of them look the exact same?
|
|
|
|
Post by onequiknova on Apr 28, 2023 17:56:19 GMT -8
|
|
maven
New Member
Posts: 33
|
Post by maven on Apr 28, 2023 18:00:24 GMT -8
The thing looks like its glaring at me with its right (my left) eyebrow raised. It’s obvious as daylight. i can’t unsee it. Look where the bottom edge of the window falls in relation to the other side.
|
|
|
|
Post by Baikal on Apr 28, 2023 18:20:26 GMT -8
The thing looks like its glaring at me with its right (my left) eyebrow raised. It’s obvious as daylight. i can’t unsee it. Look where the bottom edge of the window falls in relation to the other side.
I'm not seeing the windshield asymetery, try as I might. But you see it.
This is like the episode with Shatner.
|
|
|
|
Post by typhoon on Apr 28, 2023 18:35:50 GMT -8
Where’s that ignore button? For real. The model has been out since December, and had taken its licks by many people. And you think you just discovered something? I just looked at my PRR simplified scheme models, and the windows look fine. But I guess you see something different so may I suggest a different website for you. www.lenscrafters.com |
|
|
|
Post by edwardsutorik on Apr 28, 2023 19:23:36 GMT -8
I looked at PAGE 3 of this thread. The photos do not demonstrate to me asymmetry in the model. They demonstrate an asymmetrical position of the camera.
onequiknova's pictures do better at showing the model. And I see no asymmetry in the model.
Ed
|
|
|
|
Post by SOMECALLMETIM on Apr 28, 2023 19:27:24 GMT -8
|
|
|
|
Post by nsc39d8 on Apr 28, 2023 19:54:25 GMT -8
Might be time to lock this one!
|
|
|
|
Post by lvrr325 on Apr 29, 2023 0:13:50 GMT -8
Let's get a direct head on shot of one so there's no reason to argue the angles.
Edit: that will show me to reply to posts at 4 am. I missed a whole page including the good photos and a lot of nonsense. (giant eye roll)
|
|
|
|
Post by rrpolice on Apr 29, 2023 5:09:54 GMT -8
James is onto something. Cleaned and locked.
|
|
