Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Nov 19, 2017 9:14:28 GMT -8
For the most part, yes. There are a couple of cars that could use some sprucing up...
|
|
|
Post by stevewagner on Nov 20, 2017 15:02:34 GMT -8
Question for David Lehlbach and knowledgeable modelers: How close are Tangent's new 4750 PS-2CD's with solid side posts (with no notches at their lower ends for drainage) to the cars built for the Delaware & Hudson in 1974? Are we any closer to seeing Tangent 4750's decorated for the D&H?
Thanks for any information you can provide. I'm sure I'm not the only D&H modeler who's curious about this.
Steve Wagner
|
|
|
Post by surlyknuckle on Nov 20, 2017 15:52:47 GMT -8
I'm not an expert at PS2CD phases, but looking at pics of the D&H cars, they have full-length posts. I'm fairly sure these cars can be modeled with existing Tangent models, if not released by Tangent. I didn't compare the jack pads, just the side posts and body mounted brakes.
|
|
|
Post by tangentsm on Nov 21, 2017 10:54:23 GMT -8
Any hopes that we might see Tangent 4750's available in early CSX paint before the decade is over?? Yes, you will. David Lehlbach Tangent Scale Models
|
|
|
Post by GP40P-2 on Nov 21, 2017 14:34:56 GMT -8
Please leave Mr. Tangent alone with all of this D&H and CSX stuff He is busy working on early Flex-Flo hoppers to replace that pre-historic AHM car.
|
|
|
Post by tangentsm on Nov 21, 2017 14:50:15 GMT -8
Question for David Lehlbach and knowledgeable modelers: How close are Tangent's new 4750 PS-2CD's with solid side posts (with no notches at their lower ends for drainage) to the cars built for the Delaware & Hudson in 1974? Are we any closer to seeing Tangent 4750's decorated for the D&H? Thanks for any information you can provide. I'm sure I'm not the only D&H modeler who's curious about this. Steve Wagner Steve, Yes, D&H cars are the same. You probably should start saving... Best wishes, David Lehlbach Tangent Scale Models
|
|
|
Post by csxt8400 on Nov 21, 2017 15:21:08 GMT -8
Any hopes that we might see Tangent 4750's available in early CSX paint before the decade is over?? Yes, you will. David Lehlbach Tangent Scale Models Well, with that news I can pencil in the completion of my ongoing CSX grain train. Thanks in advance, Dave. Now how about an all new coil car
|
|
|
Post by stevewagner on Nov 21, 2017 18:08:43 GMT -8
David Lehlbach, thanks very much for your response! I'll spread the word in the January issue of the Bridge Line Historical Society Bulletin. (The deadline for submitting material for that is this Friday.)
I'm also one of the people who would love to see Tangent produce an early New York Central Flexi-flow covered hopper.
|
|
|
Post by stevewagner on Nov 21, 2017 18:09:16 GMT -8
David Lehlbach, thanks very much for your response! I'll spread the word in the January issue of the Bridge Line Historical Society Bulletin. (The deadline for submitting material for that is this Friday.)
I'm also one of the people who would love to see Tangent produce an early New York Central Flexi-Flo covered hopper.
|
|
|
Post by csx3305 on Nov 21, 2017 19:20:08 GMT -8
Any hopes that we might see Tangent 4750's available in early CSX paint before the decade is over?? Yes, you will. David Lehlbach Tangent Scale Models This makes me very happy, sir.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Nov 24, 2017 8:01:45 GMT -8
I will gladly buy a dozen Mopac 1978 built PS 4750 that had the screaming eagle buzzsaw. Tim and Tom, As you are likely already aware, there were four orders for MP 4750s. Give us time guys! In the meantime, please do what you can do to help the new cars sell. The new cars represent the first series of PS4750s MP purchased, and are the second largest group of PS4750s purchased so are very statistically relevant. Best wishes, David Lehlbach Tangent Scale Models David: Once again, I am thankful for your production of MP models...I placed my initial order today!!!!
|
|
|
Post by tangentsm on Nov 25, 2017 12:41:22 GMT -8
Tim and Tom, As you are likely already aware, there were four orders for MP 4750s. Give us time guys! In the meantime, please do what you can do to help the new cars sell. The new cars represent the first series of PS4750s MP purchased, and are the second largest group of PS4750s purchased so are very statistically relevant. Best wishes, David Lehlbach Tangent Scale Models David: Once again, I am thankful for your production of MP models...I placed my initial order today!!!! Thank you Tom! Tangent is thankful for your order. We are packing orders today and will be shipping lots of product this week! Don't miss out this holiday season on a Tangent car under the tree! Best wishes, David Lehlbach Tangent Scale Models
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Dec 1, 2017 20:43:47 GMT -8
The Missouri Pacific Covered hoppers are absolutely beautiful. Paint color and lettering is perfect.
Thanks again, David!
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Dec 2, 2017 5:38:28 GMT -8
The Missouri Pacific Covered hoppers are absolutely beautiful. Paint color and lettering is perfect. Thanks again, David! Ditto. Received my C&NW ones yesterday and couldn’t be happier!
|
|
|
Post by csxt8400 on Dec 2, 2017 14:54:30 GMT -8
Mopac and the Landmark 4740 came in today. Stunning as usual, i'll need to get some glue for the roof walks but that's no biggie.
|
|
|
Post by markfj on Dec 3, 2017 5:56:52 GMT -8
Any chance we’ll see another run of PC cars in different numbers from the previous run? Thanks, Mark
|
|
|
Post by tangentsm on Dec 4, 2017 20:11:11 GMT -8
Any chance we’ll see another run of PC cars in different numbers from the previous run? Thanks, Mark Absolutely, there is a chance for those in a future run! Best wishes, David Lehlbach Tangent Scale Models
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Dec 5, 2017 3:52:08 GMT -8
I received six of them today. Beautiful... but with Tangent, it is the rule #1, isn't it ? Thanks for this work, David !
Pierre BARBE
|
|