|
|
Post by stevef45 on Sept 9, 2019 13:02:42 GMT -8
I picked up testors sealer for metalizer clear a while back after someone on the atlas forums recommended it. I just cant remember what you need to thin it with? What ratio? And what psi?
|
|
|
|
Post by cr9617 on Sept 9, 2019 15:07:46 GMT -8
the bottle I have says no thinning required.
|
|
|
|
Post by Mark R. on Sept 14, 2019 18:54:36 GMT -8
That was probably me making that recommendation. I spray it as is right out of the bottle at 32 psi and makes for a beautiful gloss coat. I also use it to thin Model Master Flat which works great as a thinner and also producing a nice satin finish.
Mark.
|
|
|
|
Post by slowfreight on Oct 6, 2019 11:21:36 GMT -8
I also use it as a final clear coat before decaling. Usually spray at about 20psi with no thinning.
|
|
