Aibrush hose size help please.

[steveturner]

Guys I picked up a nice airbrush compressor that came with a black coiled hose.The end for compressor same as my Paasche hose but end for airbrush larger??. Don't need the coil hose but may as well make it usable .The Paasche has a 1/8 end to connect to Paasche airbrush this other end on coil hose to attach to airbrush using my tape measure is about 1/4 inch wide diameter wise..Looked for info etc but bit confused about this coil hose and the size of fitting on end. I need something to reduce the coil hose end size down to Paasche air brush 1/8th.Thanks for any help.Steve

[santafe49]

www.micromark.com/1-8-Male-To-1-4-Fem-Adapter

I believe this is what you are looking for.


www.micromark.com/1-8-Male-To-1-4-Male-Adaptr

Or this maybe.

[steveturner]

Thanks for info.Now I know what to look for. I need 1/4 inch male end to fit hose and 1/8 female for Paasche brush. I think HA! Steve

[elfan]

Also,you might want to add a quick connect to the air hose and any attachments you have. HD,Lowe’s,Harbor Freight all carry the needed hardware.

Tom

[Deleted]

www.midwestairbrush.com/aihoqudi.html

[grahamline]

You don't mention a water trap or a pressure regulator. Unless you're in a really really low humidity area, like Death Valley, you'll want a water trap, and unless you have a regulator, you'll be trying to spray at the full compressor output.