|
Post by ChessieFan1978 on Oct 27, 2019 14:46:20 GMT -8
|
|
|
Post by stottman on Oct 27, 2019 22:29:40 GMT -8
Car was built from an undec Atlas kit. Decals are a mix of Microscale, Herald King, and Custom decals done by PDC of Canada. Anyways, I finally got the oil weathering done. A few other details, and it will be done.
|
|
|
Post by dti406 on Oct 28, 2019 4:35:22 GMT -8
Good morning from cloudy and cool Northeast Ohio! First up is an IMRC 40' PS1 Boxcar Kit, painted with Scalecoat II Boxcar Red and Black paints, then lettered with Speedwitch Media Decals. The Lehigh Valley got the first order of PS1's made by Pullman Standard and these were used in general service. These were sold to Evans Products in the late 60's and leased back and were painted in PC Green. A lot of the bankrupt railroads in the 60's and 70's did this. Next is an Athearn ACF 4600CF Covered Hopper kit, painted with Scalecoat II UP Covered Hopper Gray Paint and lettered with Oddballs decals. The ACF 4600 CF Car was used by a lot of railroads as it was a Plate B car and could make it into sidings that the ACF 4650 car could not. This is the first Tangent G43 Gon that I am assembling, this one will be in PRR and the others will be in PC, most will be fitted with coil cradles for transporting coiled steel. Thanks for looking! Rick Jesionowski
|
|
|
Post by myoungwisc on Nov 4, 2019 7:37:06 GMT -8
This car is really well done! Car was built from an undec Atlas kit. Decals are a mix of Microscale, Herald King, and Custom decals done by PDC of Canada. Anyways, I finally got the oil weathering done. A few other details, and it will be done.
|
|