|
|
Post by steveturner on Jul 28, 2020 13:37:29 GMT -8
Guys the Plano walkways etched material is there an up and down....Having an issue deciding.Thanks.Steve
|
|
|
|
Post by bdhicks on Jul 28, 2020 15:38:07 GMT -8
It shouldn't matter for the actual walkway material. The frame it does matter but that is given in the instructions (you should bend in on the etched bend lines).
|
|
|
|
Post by steveturner on Jul 28, 2020 16:09:50 GMT -8
It shouldn't matter for the actual walkway material. The frame it does matter but that is given in the instructions (you should bend in on the etched bend lines). Thank you for the answer.Steve..yes i see the lines on the bend side |
|
|
|
Post by nsc39d8 on Jul 28, 2020 17:11:35 GMT -8
Actually it does matter which side is up on the walkway. There are etched lines and detail on the top side of the walkway. This in=mage is of the bottom/down side of the walkway. Notice how the space between the panels is solid.  This is the topside, side you will see on the model. The etched lines are the panel separations, also note the bolt detail.  |
|
|
|
Post by bdhicks on Jul 28, 2020 18:41:15 GMT -8
Actually it does matter which side is up on the walkway. There are etched lines and detail on the top side of the walkway. This in=mage is of the bottom/down side of the walkway. Notice how the space between the panels is solid. This is the topside, side you will see on the model. The etched lines are the panel separations, also note the bolt detail. Plano kit #305 is the MDC tank car platforms, which has single Apex panels. |
|
