|
Post by fishbelly on Oct 22, 2020 10:03:10 GMT -8
|
|
|
Post by stevewagner on Oct 22, 2020 10:14:40 GMT -8
AMEN!
Thanks very much for posting this.
|
|
|
Post by fmilhaupt on Oct 22, 2020 10:20:58 GMT -8
He makes a turboencabulator...
I have a waybill for a load of turboencabulators, currently assigned to a boxcar, but I'm going to have to make a replacement bill for one on a flat car now.
The load is bound for the super-scientists at the Venture Industries plant/compound in Colorado Springs.
(Go Team Venture!)
|
|
|
Post by jonklein611 on Oct 22, 2020 10:34:47 GMT -8
He makes a turboencabulator... I have a waybill for a load of turboencabulators, currently assigned to a boxcar, but I'm going to have to make a replacement bill for one on a flat car now. The load is bound for the super-scientists at the Venture Industries plant/compound in Colorado Springs. (Go Team Venture!) Classic! I wanted to thank you for finding Grover Cleveland's presidential time machine for me. I'll give him your regards.
|
|
|
Post by slowfreight on Oct 22, 2020 10:37:35 GMT -8
Ha! I'm only the third one to the party on the turboencabulator! Nothing beats the original film thereof. One must read that GE spec sheet veeery carefully...
Honestly, I didn't realize how big those things were. Much larger than my interocitor.
|
|
|
Post by 12bridge on Oct 22, 2020 10:38:07 GMT -8
Cool stuff for sure....
I picked up one of the Nordberg Radials, and the print quality...was pretty terrible.. very poorly oriented for printing.
|
|
|
Post by valenciajim on Oct 22, 2020 13:37:00 GMT -8
Thanks for posting this. I purchased four loads. We'll see how they turn out.
|
|
|
Post by valenciajim on Oct 26, 2020 16:52:49 GMT -8
I received my four loads today. These are really nice. Worth the price. The service was excellent. The order was timely filled and shipped.
|
|
|
Post by fishbelly on Oct 26, 2020 17:24:32 GMT -8
Great, thanks for the information. As soon as I get a few other things I am needing for my modeling. I'll get me some loads.
|
|
|
Post by theengineshed on Oct 26, 2020 18:11:45 GMT -8
The Turboencabulator and High-Pressure Stage Casing Pump showed up today, very fast shipper. Quite "fit for purpose", they will make great loads. The Turboencabulator could use a etched fan, but I'll try sharpening the printed one...
|
|
|
Post by fishbelly on Oct 27, 2020 5:33:11 GMT -8
Wouldn't loads like these large parts be covered to protect them from the elements?
They would look cool as open loads, but was wondering if most likely they would be covered.
|
|
|
Post by jonklein611 on Oct 27, 2020 5:51:24 GMT -8
Wouldn't loads like these large parts be covered to protect them from the elements? They would look cool as open loads, but was wondering if most likely they would be covered. Depends on the load: www.railpictures.net/photo/752148/
|
|
|
Post by TBird1958 on Oct 27, 2020 7:27:11 GMT -8
|
|
|
Post by fishbelly on Oct 27, 2020 8:54:07 GMT -8
I like JWD a lot. He casts the loads when you purchase them so it may take a while. I have about 100 of his fine grade coal loads for the Bowser 100 ton hopper. Fit real nicely into the hoppers without gaps around the edges.
|
|
|
Post by oldmuley on Oct 27, 2020 18:42:26 GMT -8
He makes a turboencabulator... I have a waybill for a load of turboencabulators, currently assigned to a boxcar, but I'm going to have to make a replacement bill for one on a flat car now. The load is bound for the super-scientists at the Venture Industries plant/compound in Colorado Springs. (Go Team Venture!) Turboencbulator AND Venture Brothers! You sir win 10 electric internets!
|
|