|
|
Post by bdhicks on Jul 22, 2012 17:36:11 GMT -8
I finally got these (mostly) decaled, and so I wanted to share.  I still need to get all the numberboards, and I was just planning on doing those up on my printer, but I want to hold off a bit so I don't use a whole sheet of decale paper on just those. |
|
|
|
Post by KIM on Jul 22, 2012 18:36:24 GMT -8
They're looking good already.
|
|
|
|
Post by dti406 on Jul 23, 2012 3:21:27 GMT -8
Here is the completed Moloco GATC RBL boxcar after I have added all the ladders, brake wheel, housing, sill steps, and door detail. It is now washed, painted and about 80%of the decals have been applied.  A end of the car with ladders, made out of delrin, so they will not break due to handling. walkover platform and cut levers.  B end of the car, with ladders, brake housing, brake wheel, walkover platform and cut levers.  Side view of the car, with ladders, roofwalk and door hardware (also delrin) attached.  Bottom view with all detail including stepped sill steps, that are angled to give the car its Plate B clearance. Rick J |
|
|
|
Post by powersteamguy1790 on Jul 23, 2012 13:30:01 GMT -8
A head on view of the boiler of a CB&Q O-4 Mikado #5506 showing all the pewter detail Parts. This is an excellent view of the Feed Water Heater and it's detailed piping  Stay cool and run steam......  |
|
|
|
Post by KIM on Jul 25, 2012 23:10:03 GMT -8
Bob, do you have a good side view of that engine?
|
|
|
|
Post by powersteamguy1790 on Jul 26, 2012 6:30:45 GMT -8
|
|
|
|
Post by onequiknova on Jul 26, 2012 11:12:11 GMT -8
Is that some kind of kit, or did you pick and choose the parts?
|
|
|
|
Post by powersteamguy1790 on Jul 26, 2012 12:49:22 GMT -8
Is that some kind of kit, or did you pick and choose the parts? It's a GHQ pewter detail kit to turn a generic Kato Mikado into a CB&Q 0-4 Mikado. Stay cool and run steam..... |
|
|
|
Post by rhpd42002 on Jul 27, 2012 15:02:10 GMT -8
Brian, very nice looking set of Minnesota Central locos.
Rick, great progress on the Moloco boxcar.
Bob, Never knew there was that much detail that could be added to those locos. Nice work.
Come on the rest of you guys.... I KNOW many of you have pics to share. No need to be bashful!! ;D
|
|
