|
|
Post by nebrzephyr on Aug 1, 2015 9:24:52 GMT -8
Using the LOKProgrammer to configure a LOKSound Select decoder. Not sure I understand the meaning/affect of the "Minimum Sound Speed"and "Maximum Sound Speed". From the screen shot the sliders appear to indicate the values can be greater than 100%. Any insight would be appreciated/ Thanks. Bob  |
|
|
|
Post by davidmbedard on Aug 7, 2015 20:43:42 GMT -8
The Sound Speed setting for the particular slot is the rate at which the processor will play back a sound file. For example, if you want the Nathan K3L horn, but wished it was a wee bit higher pitched or lower pitched, you would set the maximum speed accordingly. The cool thing is that you can pitch your prime movers so the chip will either play it back a bit lower (slower speed) or higher (faster speed) so if you have, say, 2 EMD 567s, you can make it sound like 2 prime movers rather than 2 of the exact same recording. I find that a change of 1% makes enough of a difference.
David Bedard
|
|
|
|
Post by nebrzephyr on Aug 8, 2015 6:46:02 GMT -8
David...thanks for the info. Bob
|
|
