|
|
Post by csxt8400 on Sept 6, 2022 11:14:35 GMT -8
Looking for a true measurement of the raised "F" on this small medallion that EMD applied to various units in the 60's and 70's. See below: I need an exact measurement, because I'm already thinking it's a hair under 3 inches.  |
|
|
|
Post by edwardsutorik on Sept 6, 2022 13:33:32 GMT -8
I don't have one handy, so cannot give you an exact measurement.
Scaling off of the photo, I get the height of the letter being 1.94"-2.06". Nowhere near 3".
I get the diameter of the casting as 2.78"-2.94". A snidge under 3".
Ed
|
|
|
|
Post by nsc39d8 on Sept 6, 2022 15:16:38 GMT -8
|
|
|
|
Post by 12bridge on Sept 6, 2022 16:30:39 GMT -8
|
|
|
|
Post by csxt8400 on Sept 6, 2022 17:37:35 GMT -8
|
|
|
|
Post by 12bridge on Sept 6, 2022 17:39:02 GMT -8
If you want me to throw it flat on the scanner with a scale I can.
|
|
|
|
Post by csxt8400 on Sept 6, 2022 19:03:59 GMT -8
If you want me to throw it flat on the scanner with a scale I can. I wouldnt object to that one bit, this is for a decal project so the closer the better! |
|
|
|
Post by 12bridge on Sept 6, 2022 19:06:36 GMT -8
If you want me to throw it flat on the scanner with a scale I can. I wouldnt object to that one bit, this is for a decal project so the closer the better! Will do it tomorrow afternoon for ya. |
|
|
|
Post by edwardsutorik on Sept 6, 2022 19:47:52 GMT -8
The one above doesn't look quite like a match to the one in the photo. The letter has a greater distance between itself and the surround. But it's surely pretty close. Ed |
|
|
|
Post by 12bridge on Sept 8, 2022 8:43:24 GMT -8
|
|
|
|
Post by csxt8400 on Sept 8, 2022 9:46:47 GMT -8
Thanks again, I really appreciate it!
|
|
