|
Post by ncrc5315 on Jan 25, 2023 16:24:58 GMT -8
Where do you go to download the software?
|
|
|
Post by canrailfan on Jan 25, 2023 20:47:38 GMT -8
You might find the following YouTube video helpful: Model Railway Digital Controller (DCC++) for £40 or less! The information on downloading the DCC++ sketch (software) starts at 8:37. The GitHub page has changed slightly. Click on the green Code button and then click on Download Zip. Follow the remaining steps to unzip the folder and upload the sketch to the Arduino. Depending on the Motor Shield you're using you may or may not have to break the trace for the power connection between the Motor Shield and the Arduino (shown at 10:43). Hope this is helpful.
|
|
|
Post by ncrc5315 on Jan 26, 2023 14:32:46 GMT -8
Thank you it was, got it downloaded to my UNO.
|
|
|
Post by santafe49 on Jan 27, 2023 19:12:27 GMT -8
If you want to add WiFi, you will have to upgrade to a Mega. The Uno doesn't have the space for that part of the program.
|
|
|
Post by ncrc5315 on Jan 27, 2023 19:35:30 GMT -8
The Mega showed up today, the MakerFab WiFi shield won't be here until next month.
|
|
|
Post by crazycanuckbl on Apr 19, 2023 4:43:58 GMT -8
|
|