|
|
Post by cpr4200 on Jul 17, 2024 16:27:45 GMT -8
What are the tolerances for the Cricut machine? +/- .005"? Better than that? Worse?
|
|
|
|
Post by Donnell Wells on Jul 17, 2024 16:55:30 GMT -8
What are the tolerances for the Cricut machine? +/- .005"? Better than that? Worse? According to Cricut’s website: “Cricut Venture cut at commercial speeds at a wider width. The result? New motors and other hardware that increases machine speed to up to 25 inches per second with a cutting width of up to 24 inches. These hardware changes also increased precision with mechanical resolution of 0.006 mm/step, software resolution at 0.025 mm, and repetition accuracy of ± 0.1 mm” Hope this is helpful. Donnell |
|
|
|
Post by cpr4200 on Jul 17, 2024 17:56:27 GMT -8
.006mm = ~.0002" .025mm = ~.001" .1mm = ~.004" Close enough for gov't work! Thank you.
It's interesting that the software tolerances don't seem to take advantage of the machine's capability.
|
|
