|
|
Post by bncascadegreen on Nov 19, 2024 11:26:20 GMT -8
What do you all use for foam board adhesive? Also attaching rock molds to foam board?
|
|
|
|
Post by edwardsutorik on Nov 19, 2024 11:57:03 GMT -8
Old latex paint will do the job--be sure and weight it. I used stuff called Glidden Gripper. I read that it's been reformulated to be useless, and that something else should be used. If you search for Gripper, you'll find alternatives. Like I said, I've read that leftover latex paint will work. And it's free.
Rock molds: For me, that's a two phase thing. First make a void and install the casting--I do not recall what I used for that, maybe some sheetrock mud. Second is the "surround", which would be the nearby dirt. For me, that too is sheetrock mud. Once that's on and set, I doubt it matters what was hold it in step one.
Ed
|
|
|
|
Post by lvrr325 on Nov 19, 2024 12:48:13 GMT -8
Liquid Nails in a caulk gun is what I used.
|
|
