|
|
Post by steveturner on Aug 31, 2018 12:41:13 GMT -8
Guys Trying to help my friend out .He has installed Tsunami sound in a loco. Gets the over power 10 lights flashing or something. He has taken it in and out loco 3 or 4 times, no go. Using Digitrax Zephyr. Any ideas?. ...Looked online didn't see much about situation. Thanks.Steve
|
|
|
|
Post by fmilhaupt on Sept 1, 2018 6:35:20 GMT -8
Steve, we're gonna need some more details to be any kind of help: What kind of loco? Decoder plugged in, or hard-wired? If plugged in, to which kind of connector? What is indicating "over power"(?) - the decoder and lights or the command station
Without that information, you'll just get useless answers, if any.
I'd also recommend reposting this over in the DCC section, if it doesn't get moved by the moderator(s).
|
|
|
|
Post by NS4122 on Sept 1, 2018 7:20:00 GMT -8
Steve,
I assume you are referring to the Red fault LED flashing ten times which indicates that the decoder is receiving too much input(track)voltage.
For some reason it is sensing that the track voltage is over 22-27 volts. I would get a volt meter and check the track voltage to make sure it is
within limits. If the voltage is OK then the decoder may be defective. I don't think knowing the loco or connector type etc, would be relevant.
|
|
|
|
Post by lee1234 on Sept 5, 2018 9:33:08 GMT -8
The Ten or something is a big deal. Count the exact number of flashes and refer to the Diesel Sound Users Guide to find out what it means.
|
|
|
|
Post by NS4122 on Sept 6, 2018 8:26:00 GMT -8
The Ten or something is a big deal. Count the exact number of flashes and refer to the Diesel Sound Users Guide to find out what it means. Geez Did you read the reply prior to yours?? |
|
|
|
Post by lee1234 on Sept 7, 2018 6:32:44 GMT -8
The Ten or something is a big deal. Count the exact number of flashes and refer to the Diesel Sound Users Guide to find out what it means. Geez Did you read the reply prior to yours?? Your answer is correct for 10 flashes. He stated 10 or something. if it wasn't exactly 10 flashes it would be another fault. |
|
