|
|
Post by ncrc5315 on Jan 5, 2019 18:30:54 GMT -8
I recently acquired a F7 locomotive from Bradford Exchange, before I try to remove the shell, anybody ever put a decoder in one? If so, what does it to install one?
|
|
|
|
Post by Artur on Jan 6, 2019 9:50:47 GMT -8
who's make is the F7?
|
|
|
|
Post by ncrc5315 on Jan 6, 2019 13:44:41 GMT -8
Don't know, some say it is a Bachman, and others say a brand I've never heard of.
|
|
|
|
Post by jonklein611 on Jan 7, 2019 4:25:47 GMT -8
|
|
|
|
Post by ncrc5315 on Jan 20, 2019 18:30:48 GMT -8
For anyone interested, here is what I found:  You can see one of the two shell screws in this picture, the other one is in the opposite corner of the other truck.  Here you can see the circuit board, with a plug for a 21 pin decoder. The head light is a LED, with the resistors already on the main board, and as you can see, there is a speaker enclosure there. I will be installing a Loksound select, with a 28mm speaker.  |
|
|
|
Post by steveturner on Jan 20, 2019 18:54:40 GMT -8
Think its made by Kader who makes Bachmann maybe.
|
|
