chet6
New Member
Posts: 24
|
Post by chet6 on Jul 21, 2019 16:52:19 GMT -8
I'm using the Engine Driver app on Digitrax and I run a few loco's mu'd up in a consist. After I release a consist and then pull them up later, it won't let me pull up the lead loco or steal it, it just says that loco is in a consist. They will work with my DT 500 cab but that engine is done runing with the app. I can still run other loco's mu'd up or just one without a problem. All my decoders are Loksound and i'm using a Digitrax Lnwi. Any help would be awesome, thanks Chet
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jul 23, 2019 10:09:13 GMT -8
Is your app up to date? A lot of work was done to the Digitrax WiThrottle implementation, and older versions of the app might have some bugs.
|
|
|
Post by jonklein611 on Jul 23, 2019 10:23:56 GMT -8
You may also need to update the firmware on your digitrax items.
|
|
chet6
New Member
Posts: 24
|
Post by chet6 on Jul 23, 2019 12:46:56 GMT -8
I downloaded the app 6 months ago. My digitrax is around a year and a half old so would it need to be updated already ?
|
|
|
Post by jonklein611 on Jul 23, 2019 16:23:20 GMT -8
I downloaded the app 6 months ago. My digitrax is around a year and a half old so would it need to be updated already ? It might. There's no telling how long it was on the shelf. MR just had an article about updating firmware on them.
|
|