Digitrax DT402R reset

[middledivision]

I have a DT402R throttle that won't work in radio mode. Is there a reset for it?

[jonklein611]

Plug the throttle into a UP5, power your system up, you do NOT need to turn on track power.

1. Press the OPT/t key to access the Options menu. (Bottom row, second from left) the word "Options" will be flashing.
2. Use the R Throttle to scroll through the options. They are in the same orderas the following charts (on pg 50-51). The names will blink during this part of the process.

With the Right throttle knob, rotate it "clockwise" until you see "FactoryD", it's the last option and nothing will appear if you continue to turn the knob.

3. Use the Y/+ or the N/- key to toggle through the values for each optionuntil the desired value appears on the screen. (normally "on" or "off") Either Key will work, press one once to change the the value, press it again to change the value again.
4. To change another option, repeat steps 2 and 3.
5. Press EXIT key at any time to cancel all of your changes
6. When you are satisfied with the changes, press the ENTER key to set all ofthe changes at once.
7. You can return to the factory defaults by resetting the last option, FactoryDto On and pressing the ENTER key.

[middledivision]

Thanks!