|
Post by steveturner on Oct 15, 2019 13:49:40 GMT -8
Guys a friend has old QSI sound in a loco.Sounds work but it will not run /move.Tried F9 shutdown and start F6.Reset etc no luck.I don't think the decoder is hooped he does.Any thoughts...no movement reset to Address 03 reset took loco still no move.Thanks.Steve
|
|
|
Post by bnsf971 on Oct 15, 2019 15:53:31 GMT -8
Try setting cv19 to 0, and check to make sure the address isn't in a consist somewhere. And resetting those decoders involves setting three different cv's.
|
|
|
Post by steveturner on Oct 16, 2019 10:00:09 GMT -8
Thanks.Not sure if QSI gone from the scene now??.Steve
|
|
|
Post by kentuckysouthernrwy on Oct 16, 2019 16:44:37 GMT -8
|
|