|
Post by edwardsutorik on Nov 12, 2019 18:38:46 GMT -8
I'm working on a locomotive that needs a decal under each window and on each end that says "REMOTE CONTROL EQUIPPED", white on a red band.
Microscale makes something really close (87-1411), except that the decal is too long (.48" rather than .40"). It seems like I'm making way too much out of .08", except that the window it fits under is .40" wide. And it will look funny if I use the longer decal.
So.
I thought I'd ask here if anyone has run into such a shorter decal. It IS a long shot. And I am most likely being over-the-top picky. And I AM lucky to even have the Microscale one.
But if some guy somewhere makes the right length decal, it would sure look nice.
Anyone run into such a thing?
Ed
|
|
|
Post by cemr5396 on Nov 12, 2019 18:43:26 GMT -8
I'm pretty sure Highball makes them, but I have no idea how long the decal actually is.
|
|
|
Post by edwardsutorik on Nov 12, 2019 19:02:42 GMT -8
Thanks. I didn't see any in the "accessory" list. I had a quick look through their "locomotive" list, and didn't see any, either. I'll go back a do a deeper search on the latter, later.
They sure do some interesting stuff.
Thanks,
Ed
|
|
|
Post by 12bridge on Nov 12, 2019 19:08:50 GMT -8
|
|
|
Post by edwardsutorik on Nov 12, 2019 21:35:16 GMT -8
Yes. Now I see it. Thank you to both.
I'll get a couple of sheets and see if they fit. They DO look promising--the "short" ones, especially.
Again, thanks, guys! I am so glad I asked.
Ed
|
|
|
Post by ncrc5315 on Nov 13, 2019 19:04:27 GMT -8
If Highball ones don't work, try this guy: www.pda.caBilly is great to work with.
|
|
|
Post by edwardsutorik on Nov 13, 2019 20:26:18 GMT -8
I, today, ordered some of the Highball Graphics decals.
As has been demonstrated, I'm a little slow. I don't see any remote control decals in the last two posts. No surprise there, eh?
Ed
|
|
|
Post by ncrc5315 on Nov 15, 2019 17:31:55 GMT -8
PDC.ca, if you send him what your looking for, will custom print them for you.
|
|
|
Post by edwardsutorik on Nov 15, 2019 17:44:13 GMT -8
Thanks. I may well do that if the Highball don't fit. They do have some neat decals, and I ordered a useful assortment. To me.
Ed
|
|
|
Post by edwardsutorik on Nov 22, 2019 9:21:57 GMT -8
I just received the Highball decals.
The Microscale are .48" long The Highball are .44" long Desired length is .40"
The Highball are close enough that no one will notice. Which, as you know, is a pretty common concept in model railroading.
Thanks to all who helped out,
Ed
|
|