|
|
Post by Artur on Mar 10, 2020 8:30:45 GMT -8
Can I test a Soundtraxx equipped locomotive with a LokProgrammer?
|
|
|
|
Post by jonklein611 on Mar 10, 2020 9:28:52 GMT -8
You can, but it may or may not read all CV's. You can certainly operate the decoder.
|
|
|
|
Post by Artur on Mar 10, 2020 14:37:35 GMT -8
You can, but it may or may not read all CV's. You can certainly operate the decoder. Perfect, thanks for the info. |
|
|
|
Post by Mark R. on Mar 10, 2020 16:10:38 GMT -8
You can only read one CV at a time - no different than your DCC system. If you attempt to "read" the decoder, you will get an unsupported decoder message. The onscreen throttle will operate the decoder just fine.
Mark.
|
|
