|
|
Post by Artur on Mar 16, 2020 6:22:41 GMT -8
Hey guys, I'm having trouble getting the 4 digit long address programmed into a soundtraxx TSU-GN1000 decoder. It says to use CV 17 and 18 as well as have CV29 changed to 1, but nether 17 or 18 will stay changed it always goes back to the previous value. any help would be appreciated.
|
|
|
|
Post by jonklein611 on Mar 16, 2020 6:53:49 GMT -8
Silly question, but what address are you trying to program in? I ran into issues because anything below 128 is considered a "two digit" address.
|
|
|
|
Post by jonklein611 on Mar 16, 2020 6:58:27 GMT -8
Also from the manual: Once the extended address is stored in CVs 17 and 18, bit 5 of CV 29 must be set to 1 so the decoder will recognize the extended address format. CV 29 does not get set to 1, it gets set to 38 normally, but depends on what features you want turned on. soundtraxx.com/content/Reference/Manuals/Tsunami/usersguide_diesel.pdfSee page 15 for the lookup table. |
|
|
|
Post by Mark R. on Mar 16, 2020 8:28:54 GMT -8
|
|
|
|
Post by Artur on Mar 16, 2020 9:41:58 GMT -8
That is very helpful, thanks for the info. |
|
