Some Combine Harvester Loads | The Atlas Rescue Forum

Some Combine Harvester Loads Feb 16, 2024 7:28:15 GMT -8 via mobile dtinut and ChessieFan1978 like this

Quote

Post by fr8kar on Feb 16, 2024 7:28:15 GMT -8

Feb 15, 2024 19:36:21 GMT -8 ChessieFan1978 said:

Feb 15, 2024 18:21:19 GMT -8 fr8kar said:

They aren't actually attached, the chains just rest against the models. Same thing on the rear. They just rest against the top of the rear axle where it meets the body.

Thanks Ryan. Did you secure the Combines to the flatcars. If so, how. I can't quite make out what looks like a wire underneath the axles.

Matt

Yes, I drilled holes through the deck and looped the wire over the axles then tied off the wire on the underside of the deck. The holes are about 4mm apart and right up against the inside of the tire so the wires stay well hidden. It's turned out to be a very secure way of mounting these loads, which are quite heavy.