|
|
Post by NS4122 on Sept 30, 2020 9:28:01 GMT -8
I'm trying to get a Lokpilot V4 to have the startup delay like my ESU sound decoders. I have the box checked off to enable it and I set the delay at 3 seconds, but when I advance the throttle it moves immediately. F8 is toggled on so it should be working. Am I missing something?
|
|
|
|
Post by bnsf971 on Oct 1, 2020 4:45:55 GMT -8
You may have to go to the configuration, and make f8 “on” instead of “off”. It could be defaulted to start immediately rather than have to be enabled with the function.
|
|
|
|
Post by NS4122 on Oct 1, 2020 15:38:48 GMT -8
Thanks, I went to the function mapping and sure enough that was the problem. It's working as intended now. You may have to go to the configuration, and make f8 “on” instead of “off”. It could be defaulted to start immediately rather than have to be enabled with the function. |
|
