|
|
Post by Gino Damen on Jan 15, 2022 13:37:01 GMT -8
A bit early but this was the project from last week. I like to have protective boxes for the command stations I have. This keeps them save during transport and because the connections are passed through so the command station hasn't to be removed from the box to be used.
A couple of weeks ago I could get an used ESU Ecos command station for a very decend price. Last week I build the box for it and installed the Ecos in it.
|
|
|
|
Post by simulatortrain on Jan 15, 2022 21:50:38 GMT -8
I printed and painted up this abandoned brick kiln stack that was located between the WM and the C&O canal. I think it predates the WM western extension if not the canal as well.   |
|
|
|
Post by tom on Jan 16, 2022 4:56:45 GMT -8
Here is a photo of my PRR redetailed Bowser H39 coal car. I removed all of the heavy modeled on grabirons and replaced them with 0.0125" wire. Kadee 178 couplers and Tahoe 70-trucks replaced the Bowser items. Finally I added Tichy stirrups and a Kadee brakewheel. Decals are a mix of leftover decals.  Almost Brings this former Stewart model up to currrent standards. |
|
|
|
Post by simulatortrain on Jan 16, 2022 12:11:05 GMT -8
Here's an update on my MPA rebuild:  Not sure what I'm going to do for trucks, the prototype had these A-3s but converted to roller bearings. |
|
|
|
Post by slowfreight on Jan 16, 2022 16:29:05 GMT -8
Here's an update on my MPA rebuild: Not sure what I'm going to do for trucks, the prototype had these A-3s but converted to roller bearings. The only converted trucks I've seen are Herpa and Rapido. But if you find the Herpa trucks they are for 50t cars. |
|
|
|
Post by ChessieFan1978 on Jan 16, 2022 18:33:36 GMT -8
|
|
|
|
Post by packer on Jan 16, 2022 18:34:34 GMT -8
Replaced a missing step on this U28C with some Plano material. I need to figure out something for a bigger lip:   Future plans for the unit are to change some details for the later 70s, and I think add a beacon (will check Proto photos) Finished a branchline kit for a C&O boxcar. Thanks to the MFCL list for finding a photo of this particular car. Need to touch up some paint and lighten the car up (lite yellow washes?)  Also could figure out how to explain this on the BN. |
|
|
|
Post by michaele on Jan 17, 2022 20:17:49 GMT -8
|
|
jako
Junior Member
Posts: 78
|
Post by jako on Jan 18, 2022 1:03:46 GMT -8
I printed and painted up this abandoned brick kiln stack that was located between the WM and the C&O canal. I think it predates the WM western extension if not the canal as well. Nice works |
|
|
|
Post by stevef45 on Jan 18, 2022 5:19:10 GMT -8
Added all the decals to my NJT/CNJ unit. Didn't get pics of it with the added color to the receptacles or hoses which made a huge difference in appearance.  20220116_191646 by Tripps Pics79, on Flickr Both air compressors crapped themselves with bad pressure relieve valves. Hopefully the replacement valves i got will fix both. Can't do anything without them. |
|
|
|
Post by nsc39d8 on Jan 18, 2022 7:36:02 GMT -8
Adam,
Are you going to make that Kiln stack available? It would be nice scenery item to have!
|
|
|
|
Post by markfj on Jan 18, 2022 9:19:37 GMT -8
Finished a branchline kit for a C&O boxcar. Thanks to the MFCL list for finding a photo of this particular car. Need to touch up some paint and lighten the car up (lite yellow washes?) Also could figure out how to explain this on the BN. C&O DF-19 with and without door openers.   I found the thread on MFCL, but didn’t see any photos attached. Thanks, Mark Reading, PA |
|
|
|
Post by simulatortrain on Jan 18, 2022 12:54:45 GMT -8
Adam, Are you going to make that Kiln stack available? It would be nice scenery item to have! I'm not sure, I had to print it in a few pieces for the height/print time. If I add a lip to make it easier to align I could... Also the missing bricks weren't printed that way, I did that with a file. |
|
